Elucidating salt-reduction mechanisms of aroma-active compounds from yeast extracts through sensomics approaches and electroencephalography.

This study investigated the savory intensity of aroma-active compounds derived from yeast extract Maillard reaction models. Sensory evaluation results revealed that beef flavoring model (28.00 g) exhibited the highest savory perception intensity when the yeast extract FA34 (0.50 g) the added. Eleven aroma-active compounds associated with saltiness perception were identified via solid-phase microextraction and extraction combined with gas chromatography-mass spectrometry/olfactory. The odorant-NaCl mixture model and saltiness intensity evaluation results revealed that thiazole and 4-methylpentanoic acid could significantly (p < 0.05) enhance the saltiness perception of salt solution (5.00 g/L), 2-methylpyrazine, 2-methyl-3-furanthiol, 2,6-dimethylpyrazine, furfuryl mercaptan, and methyl 2-methyl-3-furyl disulfide could significantly (p < 0.01) enhance the saltiness perception of a salt solution (5.00 g/L). Electroencephalography revealed that the main mechanisms underlying aroma-induced saltiness perception enhancement included the strengthening of the saltiness perception signal and prolonging signal stimulation time in the frontal regions of the cerebral cortex.

Fast detection of tryptamine in meat products with azide-functionalized covalent organic frameworks confined in molecularly imprinted polymers.

Tryptamine is a biogenic amine that affects organoleptic quality through the generation of off-odours in foods. Herein, imine-based covalent organic frameworks (COFs) were synthesized via Schiff base reactions and postmodified with click chemistry to generate azide-functionalized COFs with tunable azide units on the walls. The combination of molecular imprinting with COFs enabled the specific recognition of the targets. The resulting optosensing system (azide-functionalized COFs@MIPs) was used as a sample-to-answer analyser for detecting tryptamine (detection time within 10 min). A linear relationship was observed for the fluorescence response to tryptamine concentrations in the range of 3-120 µg L-1, with a limit of detection of 1.74 µg L-1. The recoveries for spiked samples were satisfactory, with relative standard deviations <9.90%. The optosensing system is a potential tool for the quantitative detection of tryptamine in meat products because of its lower cost, shorter processing time, and simpler processing steps compared to conventional chromatographic techniques.

Gamma-glutamylation of beef protein hydrolysates to improve its overall taste and functions of gastro-intestinal hormone (CCK and GLP-1) pro-secretion and anti-inflammation.

γ-Glutamylation of beef protein hydrolysate (BPH) by L-glutaminase was carried out to improve the taste, as well as enhance the stimulating effect of gastrointestinal hormone (CCK and GLP-1) secretion and the anti-inflammatory property. Results of sensory evaluation showed that the kokumi taste, umaminess, saltiness of the γ-glutamylated product (γ-GBPH) were significantly higher (p < 0.05), whilst the bitterness was remarkably decreased (p < 0.05) than that of BPH. γ-GBPH had a better promoting effect (p < 0.05) on CCK and GLP-1 secretion and a higher inhibition (p < 0.05) on TNF-α and IL-8 production than BPH in vitro cell experiments. In γ-GBPH, 15 γ-Glutamylated amino acids (γ-[Glu](n =1/2)-AAs) and 10 γ-Glutamyl-tripeptide (γ-Glu-AA-AAs) were synthesized from the bitter amino acids and bitter peptides, respectively, and their total production yield was 140.01-170.46 mg/g and 149.06 mg/g, respectively. The synthesized γ-Glu-AA-AAs entered the binding pocket of the calcium-sensitive receptor (CaSR), and they all interacted with three reported amino acid residues (Ser147, Ala168, and Ser170) of CaSR.

Conjugated molecularly imprinted polymers based on covalent organic frameworks: Fluorescent sensing platform for specific capture of urea and elimination of ethyl carbamate.

This study described the preparation of an azide covalent organic framework-embedded molecularly imprinted polymers (COFs(azide)@MIPs) platform for urea adsorption and indirect ethyl carbamate (EC) removal from Chinese yellow rice wine (Huangjiu). By modifying the pore surface of COFs using the copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction, COFs(azide) with a high fluorescence quantum yield and particular recognition ability were inventively produced. In order to selectively trap urea, the COFs(azide) were encased in an imprinted shell layer via imprinting technology. With a detection limit (LOD) of 0.016 µg L-1 (R2 = 0.9874), the COFs(azides)@MIPs demonstrated a good linear relationship with urea in the linear range of 0-5 µg L-1. Using real Huangjiu samples, the spiking recovery trials showed the viability of this sensing platform with recoveries ranging from 88.44 % to 109.26 % and an RSD of less than 3.40 %. The Huangjiu processing model system achieved 38.93 % EC reduction by COFs(azides)@MIPs. This research will open up new avenues for the treatment of health problems associated with fermented alcoholic beverages, particularly Huangjiu, while also capturing and removing hazards coming from food.

Investigation of interactions between Jiuzao glutelin with resveratrol, quercetin, curcumin, and azelaic and potential improvement on physicochemical properties and antioxidant activities.

The interactions among small molecular functional components (FCTs) within a food matrix have become a focal point for enhancing their stability and bioactivities. Jiuzao glutelin (JG) is a mixed plant protein within Jiuzao (a protein-rich baijiu distillation by-product). This study aimed to explore the interactions between JG and selected FCTs, including resveratrol (RES), quercetin (QUE), curcumin (CUR), and azelaic acid (AZA), and the consequential impact on stability and antioxidant activity of the complexes. The findings conclusively demonstrated that the interactions between JG and the FCTs significantly enhanced the storage stability of the complexes. Moreover, the antioxidant activity of the complexes exhibited improvement compared to their individual counterparts. This study underscores the notion that JG and FCTs mutually reinforce, exerting positive effects on stability and antioxidant activity. This symbiotic relationship can be strategically employed to augment the quality of proteins and enhance the functional properties of bioactive components through these interactions.

Cascade Microbial Metabolism of Ferulic Acid In Vitro Fermented by the Human Fecal Inoculum.

Ferulic acid (FA), predominantly existing in most cereals, can modulate the gut microbiome, but the influences of its metabolites on the microbial population and FA-transforming microorganisms are still unclear. In this study, FA and its potential phenolic metabolites were fermented in vitro for 24 h with the human fecal inoculum. A comparable short chain fatty acid (SCFA) production trend was observed in the presence and absence of substrates, suggesting limited contribution of FA mechanism to SCFA formation. Dihydroferulic acid, 3-(3,4-dihydroxyphenyl)propionic acid, and 3-(3-hydroxyphenyl)propionic acid were ascertained to be successive metabolites of FA, by tracking the intermediate variation. FA remarkably promoted the absolute abundances of total bacteria, while different metabolites affected bacterial growth of selective genera. Specific genera were identified as quantitatively correlating to the content of FA and its metabolites. Ultimately, FA-mediated gut microbiota modulation involves both the action of metabolizing microbes and the regulation effects of metabolites on bacterial growth.

Characteristics of saltiness-enhancing peptides derived from yeast proteins and elucidation of their mechanism of action by molecular docking.

This study aimed to identify saltiness-enhancing peptides from yeast protein and elucidate their mechanisms by molecular docking. Yeast protein hydrolysates with optimal saltiness-enhancing effects were prepared under conditions determined using an orthogonal test. Ten saltiness-enhancing peptide candidates were screened using an integrated virtual screening strategy. Sensory evaluation demonstrated that these peptides exhibited diverse taste characteristics (detection thresholds: 0.13-0.50 mmol/L). Peptides NKF, LGLR, WDL, NMKF, FDSL and FDGK synergistically or additively enhanced the saltiness of a 0.30% NaCl solution. Molecular docking revealed that these peptides predominantly interacted with TMC4 by hydrogen bonding, with hydrophilic amino acids from both peptides and TMC4 playing a pivotal role in their binding. Furthermore, Leu217, Gln377, Glu378, Pro474 and Cys475 were postulated as the key binding sites of TMC4. These findings establish a robust theoretical foundation for salt reduction strategies in food and provide novel insights into the potential applications of yeast proteins.

Based on metabolomics, chemometrics, and modern separation omics: Identifying key in-pathway and out-pathway points for pesticide residues during solid-state fermentation of baijiu.

By collecting real samples throughout the entire production process and employing chemometrics, metabolomics, and modern separation omic techniques, it unveiled the patterns of pesticide transfer during solid-state fermentation. The results indicated that 12 types of pesticide residues were prevalent during baijiu production, with organochlorine and carbamate pesticides being the most abundant in raw materials. After fermentation, organochlorine pesticides and pyrethroid pesticides exhibited higher content, while carbamate pesticides dominated in the final product. The pathways for pesticide input and elimination were identified, and the intricate mechanisms underlying these changes were further elucidated. Additionally, key control points were defined to facilitate targeted monitoring. The results indicated that pesticide residue primarily originates from raw materials and Daqu, whereas both solid-state fermentation and distillation processes were effective in reducing pesticide residues. The study offers valuable guidance for establishing pesticide residue standards in the context of baijiu production.

Using GC-O-MS, GC-IMS, and chemometrics to investigate flavor component succession regularity in the Niulanshan Erguotou Baijiu brewing process.

The volatile compounds in Dacha liquor (DL) and Ercha liquor (EL) from Niulanshan Erguotou Baijiu (NEB) were analyzed. The results demonstrated that a total of 34 odorants were identified. For the first time, the products of different brewing stages were analyzed using temperature-programmed headspace gas chromatography-ion mobility spectrometry (TP-HS-GC-IMS). The 3D fingerprint obtained revealed that the compounds exhibited different change patterns during the brewing process. Furthermore, the results of principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA) revealed that hexanal, 3-hydroxy-2-butanone, trans-2-pentenal, and ethyl hexanoate could be used to distinguish different types of fermented grains; and hexanal, 1-pentanol, methyl isovalerate, isoamyl acetate, 3-hydroxy-2-butanone, ethyl hexanoate, ethyl acetate, ethyl 2-methylbutanoate, and ethyl pentanoate could be used to distinguish different types of distilled spirits. This study serves as a useful reference for enhancing quality control measures in the production of NEB.

Caproicibacter sp. BJN0012, a potential new species isolated from cellar mud for caproic acid production from glucose.

Acids play a crucial role in enhancing the flavor of strong-aroma Baijiu, and among them, caproic acid holds significant importance in determining the flavor of the final product. However, the metabolic synthesis of caproic acid during the production process of Baijiu has received limited attention, resulting in fluctuations in caproic acid content among fermentation batches and generating production instability. Acid-producing bacteria found in the cellar mud are the primary microorganisms responsible for caproic acid synthesis, but there is a lack of research on the related microbial resources and their metabolic properties. Therefore, it is essential to identify and investigate these acid-producing microorganisms from cellar mud to ensure stable caproic acid synthesis. In this study, a unique strain was isolated from the cellar mud, exhibiting a 98.12 % similarity in its 16 S rRNA sequence and an average nucleotide identity of 79.57 % with the reference specie, together with the DNA-DNA hybridization of 23.20 % similarity, confirming the distinct species boundaries. The strain was able to produce 1.22 ± 0.55 g/L caproic acid from glucose. Through genome sequencing, annotation, and bioinformatics analysis, the complete pathway of caproic acid synthesis from glucose was elucidated, and the catalytic mechanism of the key thiolase for caproic acid synthesis was investigated. These findings provide useful fundamental data for revealing the metabolic properties of caproic acid-producing bacteria found in cellar mud.

Construction of resveratrol and quercetin nanoparticles based on folic acid targeted Maillard products between Jiuzao glutelin isolate and carboxymethyl chitosan: Improved stability and function.

Advanced targeted nanoparticles (NPs) were designed to enhance the targeted delivery of resveratrol (RES) and quercetin (QUE) by utilizing carboxymethyl chitosan (CTS) and Jiuzao glutelin isolate (JGI) conjugates. Briefly, RES and QUE were encapsuled within CTS-JGI-2 (CTS/JGI, m/m, 2:1). The carrier's targeting properties were further improved through the incorporation of folic acid (FA) and polyethylenimine (PEI). Moreover, the stability against digestion was enhanced by incorporating baker yeast cell walls (BYCWs) to construct RES-QUE/FA-PEI/CTS-JGI-2/MAT/BYCW NPs. The results demonstrated that FA-PEI/CTS-JGI-2/MAT/BYCW NPs could improve cellular uptake and targeting property of RES and QUE through endocytosis of folic acid receptors (FOLRs). Additionally, RES-QUE successfully alleviated LPS- and DSS-induced inflammation by regulating NF-κB/IkBa/AP-1 and AMPK/SIRT1signaling pathways and reducing the secretion of inflammatory mediators and factors. These findings indicate FA-PEI/CTS-JGI-2/MAT/BYCW NPs hold promise as an oral drug delivery system with targeted delivery capacities for functional substances prone to instability in dietary supplements.

Analysis of ester-producing performance in high-yield ethyl hexanoate yeast and the effect on metabolites in bio- enhanced Daqu, the starter for Baijiu and other traditional fermented foods.

AIMS: Ethyl hexanoate, one of the key flavor compounds in strong-flavor Baijiu. To improve the content of ethyl hexanoate in strong-flavor Baijiu, a functional strain with high yield of ethyl hexanoate was screened and its ester-producing performance was studied. METHODS AND RESULTS: Upon identification, the strain was classified as Candida sp. and designated as ZY002. Under optimal fermentation conditions, the content of ethyl hexanoate synthesized by ZY002 can be as high as 170.56 mg L-1. A fermentation test was carried out using the ZY002 strain bioaugmented Daqu to verify the role of the strain applied to Baijiu brewing. It was found that strain ZY002 could not only improve the moisture and alcohol contents of fermented grains but also diminish the presence of reducing sugar and crude starch. Furthermore, it notably amplified the abundance of flavor compounds. CONCLUSION: In this study, Candida sp. ZY002 with a high yield of ethyl hexanoate provided high-quality strain resources for the actual industrial production of Baijiu.

High-throughput visualization mutation screening technology to enhance the specificity of CadR based whole-cell cadmium biosensor.

As a heavy metal pollutant, Cd2+ often enters the human body through the food chain causing great harm to human health. Whole-cell biosensor is an emerging technology for rapid on-site detection of heavy metals with the advantages of inexpensive, fast to mass-produce, and strong in anti-interference resistance, but suffering from insatisfactory specificity. In this study, a strategy of Adjacent Site Saturation Mutation (ASSM) was designed to improve the specificity of transcription factor CadR, which acted as the recognition element and determined the specificity of whole cell Cd2+ biosensors. A specific saturated library was constructed using the strategy of adjacent mutation. After two rounds of high-throughput visual screening, a whole-cell biosensor with good response to Cd2+, and with significant weakened Hg2+ interference was obtained. The optimized whole-cell biosensor showed a linear dynamic concentration range from 500 nM to 100 µM, a detection limit of 0.079 µM, and has satisfactory specificity and anti-interference. The ASSM strategy proposed in this study can provide a new method for the application of synthetic biology in food safety detection, indicating the importance of whole-cell biosensors for the detection of heavy metals.

Molecularly Imprinted Electrochemical Sensor Based on α-Cyclodextrin Inclusion Complex and MXene Modification for Highly Sensitive and Selective Detection of Alkylresorcinols in Whole Wheat Foods.

Authenticating whole wheat foods poses a significant challenge for both the grain industry and consumers. Alkylresorcinols (ARs), serving as biomarkers of whole wheat, play a crucial role in assessing the authenticity of whole wheat foods. Herein, we introduce a novel molecularly imprinted electrochemical sensor with modifications involving a molecularly imprinted polymer (MIP) and MXene nanosheets, enabling highly sensitive and selective detection of ARs. Notably, we specifically chose 5-heneicosylresorcinol (AR21), the predominant homologue in whole wheat, as the template molecule. α-Cyclodextrin and acrylamide served as dual functional monomers, establishing a robust multiple interaction between the MIP and AR21. As a result, the sensor exhibited a wide linear range of 0.005 to 100 µg·mL-1 and a low detection limit of 2.52 ng·mL-1, demonstrating exceptional selectivity and stability. When applied to commercial whole wheat foods, the assay achieved satisfactory recoveries and accuracy, strongly validating the practicality and effectiveness of this analytical technique.

Study on the saltiness-enhancing mechanism of chicken-derived umami peptides by sensory evaluation and molecular docking to transmembrane channel-like protein 4 (TMC4).

The previously obtained chicken-derived umami peptides in the laboratory were evaluated for their saltiness-enhancing effect by sensory evaluation and S-curve, and the results revealed that peptides TPPKID, PKESEKPN, TEDWGR, LPLQDAH, NEFGYSNR, and LPLQD had significant saltiness-enhancing effects. In the binary solution system with salt, the ratio of the experimental detection threshold (129.17 mg/L) to the theoretical detection threshold (274.43 mg/L) of NEFGYSNR was 0.47, which had a synergistic saltiness-enhancing effect with salt. The model of transmembrane channel-like protein 4 (TMC4) channel protein was constructed by homology modeling, which had a 10-fold transmembrane structure and was well evaluated. Molecular docking and frontier molecular orbitals showed that the main active sites of TMC4 were Lys 471, Met 379, Cys 475, Gln 377, and Pro 380, and the main active sites of NEFGYSNR were Tyr, Ser and Asn. This study may provide a theoretical reference for low-sodium diets.

Photostimulus-Responsive Peptide Dot-Centered Covalent Organic Polymers: Effective Pesticide Sensing via Enhancing Accessibility.

Pesticide detection and monitoring are necessary for human health as the overapplication has serious consequences for environmental pollution. Herein, a proper modulation strategy was implemented to construct the photostimulus-responsive peptide-dot-centered covalent organic polymer (P-PCOP) nanoarchitecture for selective sensing of pesticides. The as-constructed P-PCOP was prepared at room temperature by using amino-containing peptide dots as a building block instead of common organic molecules, and the merits of P-PCOP enable it to reduce the steric hindrance of recognition, enhance the interfacial contact of the target, and facilitate the accessibility of sites, which promises to improve the sensitivity. The P-PCOF exhibited a low detection limit of 0.38 µg L-1 to cartap over the range of 1-80 µg L-1 (R2 = 0.9845), and the recoveries percentage in real samples was estimated to be 93.39-105.82%. More importantly, the DFT calculation confirmed the selective recognition ability of P-PCOP on chemical pesticides. In conjunction with a smartphone-integrated portable reading device, on-site chemical sensing is achieved. The proper modulation strategy of fixing a functional guest on the COP system contributes to the advanced structure-chemical properties that are conducive to their applications in chemical sensing.

Evolution of fermented grain yeast communities in strong-flavored baijiu and functional validation of yeasts that produce superior-flavored substances.

BACKGROUND: Baijiu is a well-known alcoholic beverage in China and the quality is determined by various microorganisms during the fermentation process. Yeast is one of the most important microorganisms in the fermentation of baijiu. It has a strong esterification capacity and also affects the aroma. RESULTS: High-throughput sequencing results showed that the fermented grains (jiupei) during baijiu production were mainly composed of eight highly abundant yeast species. The species and abundance of yeasts changed significantly with the fermentation process. The flavor of 30 yeast strains in the jiupei was determined by a sniffing test and gas chromatography-mass spectrometry (GC-MS). The strain with the highest flavor substance content (2.34 mg L-1 ), named YX3205, was identified as Clavispora lusitaniae. Tolerance results showed that C. lusitaniae YX3205 can tolerate up to 15% (v v-1 ) ethanol. In a solid-state simulated fermentation experiment, the content of 24 flavor substances was significantly increased in the fortified group, and the total ester content reached 4240.73 µg kg-1 , which was 2.8 times higher than that of the control group. CONCLUSION: The present study demonstrated the potential of C. lusitaniae YX3205 to enhance the flavor of baijiu, thereby serving as a valuable strain for the improvement of the flavor quality of baijiu. © 2024 Society of Chemical Industry.

Recent advances in molecularly imprinted polymers (MIPs) for visual recognition and inhibition of α-dicarbonyl compound-mediated Maillard reaction products.

α-Dicarbonyl compounds (α-DCs) are important intermediates and precursors of harmful Maillard reaction products (e.g., acrylamide and late glycosylation end-products), and they exist widely in thermoprocessed sugar- or fat-rich foods. α-DCs and their end-products are prone to accumulation in the human body and lead to the development of various chronic diseases. Therefore, detection of α-DCs and their associated hazards in food samples is crucial. This paper reviews the preparation of molecularly imprinted polymers (MIPs) enabling visual intelligent responses and the strategies for recognition and capture of α-DCs and their associated hazards, and provides a comprehensive summary of the development of visual MIPs, including integration strategies and applications with real food samples. The visual signal responses as well as the mechanisms for hazard recognition and capture are highlighted. Current challenges and prospects for visual MIPs with advanced applications in food, agricultural and environmental samples are also discussed. This review will open new horizons regarding visual MIPs for recognition and inhibition of hazards in food safety.

PeposX-Exhaust: A lightweight and efficient tool for identification of short peptides.

Short peptides have become the focus of recent research due to their variable bioactivities, good digestibility and wide existences in food-derived protein hydrolysates. However, due to the high complexity of the samples, identifying short peptides still remains a challenge. In this work, a tool, named PeposX-Exhaust, was developed for short peptide identification. Through validation with known peptides, PeposX-Exhaust identified all the submitted spectra and the accuracy rate reached 75.36%, and the adjusted accuracy rate further reached 98.55% when with top 5 candidates considered. Compared with other tools, the accuracy rate by PeposX-Exhaust was at least 70% higher than two database-search tools and 15% higher than the other two de novo-sequencing tools, respectively. For further application, the numbers of short peptides identified from soybean, walnut, collagen and bonito protein hydrolysates reached 1145, 628, 746 and 681, respectively. This fully demonstrated the superiority of the tool in short peptide identification.

Nanotechnology-based optical sensors for Baijiu quality and safety control.

Baijiu quality and safety have received considerable attention owing to the gradual increase in its consumption. However, owing to the unique and complex process of Baijiu production, issues leading to quality and safety concerns may occur during the manufacturing process. Therefore, establishing appropriate analytical methods is necessary for Baijiu quality assurance and process control. Nanomaterial (NM)-based optical sensing techniques have garnered widespread interest because of their unique advantages. However, comprehensive studies on nano-optical sensing technology for quality and safety control of Baijiu are lacking. In this review, we systematically summarize NM-based optical sensor applications for the accurate detection and quantification of analytes closely related to Baijiu quality and safety. Furthermore, we evaluate the sensing mechanisms for each application. Finally, we discuss the challenges nanotechnology poses for Baijiu analysis and future trends. Overall, nanotechnological approaches provide a potentially useful alternative for simplifying Baijiu analysis and improving final product quality and safety.